How To Install A Ceiling Medallion
Important: If your Ceiling Medallion comes with no hole from factory, it should be cut prior installation, just choose the appropriate diameter of the hole you need to cut according your electric box size and the canopy of your ceiling fan or light fixture, also check the medallion specifications (center hole diameter and maximum that a canopy can fit) provided in the product page tabs. You can use a regular hole saw tool available in any local store to cut the medallion.
Tools & Materials Needed
- Caulking Gun.
- Elastomeric Adhesive Caulk.
- Sponge or Clean Cloth.
- Putty Knife.
- Extra Fine Sandpaper.
- Hammer & Finishing Nails (nails Must Be Long Enough To Penetrate The Substrate At Least 1/2").
- Jigsaw, Keyhole saw, or pen‐knife.
Prior To Installation
- Clean installation surface and back of medallion of all dirt and dust with a clean cloth or sponge.
- Make sure that the surface and the back of the medallion are completely dry before attempting installation.
- Measure and mark the location where the medallion is going to be installed.
Important Safety Instructions
- Make sure to use the correct tools recommended.
- Wear safety goggles.
- Follow fixture, power tools, and paint manufacturers' instructions and users manuals.
- Use common sense and follow good construction practices.
- Medallions are not load‐bearing. Do not use them to support electrical fixtures or ceiling fans.
Important Note ‐ When Installation of Medallions With A Light Fixture or Ceiling Fan
- Turn the power off at the breaker before installation.
- Medallions are solely decorative. do not use medallions to support the light fixture or fan.
- Do not use the fixture or fixture canopy to support the medallion.
- Make sure you are installing the light fixture or ceiling fan according to the manufacturer's guidelines. If their installation guidelines conflict with our medallion installation instructions, be sure to contact us immediately.
- To ensure all electrical codes are met, make sure to consult with a licensed electrician.
Installation Process (1) ‐ Permanent Medallion Installation With A Light Fixture or Ceiling Fan
Disconnect and remove current fixture before installing the medallion (if a current fixture is already installed). Measure the fixture canopy. Drill/cut a hole in the center of the medallion that is no larger than the canopy size (this is the hole that the electrical will go through). Lay the medallion face down on a soft surface that will not scratch/dent the medallion detail. Apply a 1/2" bead of adhesive caulk all the way around the back edge of the medallion.
Feed the electrical wiring through the medallion's center hole and gently press the medallion up against the ceiling. When pressing the medallion up against the ceiling, some adhesive caulk will seep out. smooth excess caulk around the medallion with a finger or the putty knife and apply extra caulk that is needed to fill in any gaps. Wipe off any excess adhesive caulk with a sponge or damp rag. Larger medallions will need to be installed with nails in addition to the adhesive.
Note: if you would like to remove the nails after the adhesive sets, leave at least 1/2" of the nail sticking out from the medallion, so you can easily pull it out. Fill any nail holes with caulk and smooth the surface with a finger or the putty knife. if any excess caulk is left, let it dry, and then lightly sand it down with extra fine sand paper. Re‐connect the ceiling fixture or ceiling fan following the manufacturer's guidelines. Slide fixture canopy up to medallion and tighten. make sure it fits snugly against the medallion. Touch up the medallion with any paint that is needed.
Installation Process (2) ‐ Removable Medallion Installation With A Light Fixture Or Ceiling Fan
(this process allows for easy removal of the medallion for electrical wiring access) Follow steps 1 and 2 from "permanent medallion installation" Feed the electrical wiring through the medallion's center hole. Install using finishing nails. Countersink nails using nail set and fill any holes with caulking. smooth the caulk with your finger or putty knife. once the cAulk is dry, lightly sand it smooth if needed.
Optional: apply latex caulk around the edge of the medallion, blending the medallion into the ceiling (this will make removal slightly more difficult). Re‐connect the light fixture or fan according the manufacturer's guidelines. Slide fixture canopy up to medallion and tighten. make sure it fits snugly against the medallion. Touch up the medallion with any paint that is needed.
Installation Process (3) ‐ Medallion Installation Without A Light Fixture Or Ceiling Fan
Lay the medallion face down on a soft surface that will not scratch/dent the medallion detail. Apply a 1/2" bead of adhesive caulk all the way around the back edge of the medallion. Gently press the medallion up against the ceiling or wall. When pressing the medallion up against the ceiling or wall, some adhesive caulk will seep out. smooth excess caulk around the medallion with a finger or the putty knife and apply extra caulk that is needed to fill in any gaps. Wipe off any excess adhesive caulk with a sponge or damp rag. Larger medallions will need to be installed with nails in addition to the adhesive.
Note: if you would like to remove the nails after the adhesive sets, leave at least 1/2" of the nail sticking out from the medallion, so you can easily pull it out. Fill any nail holes with caulk and smooth the surface with a finger or the putty knife. if any excess caulk is left, let it dry, and then lightly sand it down with extra fine sand paper. Touch up the medallion with any paint that is needed.
IDM Crack Download 2023: The Ultimate Guide to Boosting Your Download Speeds
Are you tired of waiting hours for a simple file to download? IDM, or Internet Download Manager, is the solution you need to boost your download speeds and make the process faster and more efficient. In this article, we will provide you with a complete guide on IDM crack download 2023, including the benefits of using this software, the process of downloading and installing it, and how to use it effectively.
Hook: IDM is a highly effective download manager that can speed up your downloads by up to 5 times. With its user-friendly interface and advanced features, you can easily manage and organize your downloads for maximum efficiency.
Introduction: The internet has become an essential part of our lives, and with the growing reliance on digital media, the need for fast and efficient download speeds has become increasingly important. IDM crack is a software that allows you to download files from the internet with much faster speeds, making the process faster and more efficient. With its advanced features and user-friendly interface, IDM has become a popular choice for millions of users worldwide.
H1: The Benefits of Using IDM Crack Download 2023
Faster Download Speeds: One of the biggest benefits of using IDM is the significant boost in download speeds. With IDM, you can download files up to 5 times faster than with a regular download manager.
Resume Downloads: Another advantage of using IDM is its ability to resume broken or interrupted downloads. This feature is especially useful if you have a weak internet connection or if your download is disrupted due to a power outage.
Schedule Downloads: With IDM, you can easily schedule downloads for a specific time or date. This feature is especially useful if you need to download a large file overnight or during a time when you won't be using your computer.
User-Friendly Interface: IDM has a user-friendly interface that is easy to use, even for those with limited technical knowledge. The interface is simple and intuitive, making it easy to manage and organize your downloads.
H2: How to Download and Install IDM Crack Download 2023
Download the IDM Crack: The first step in the process is to download the IDM crack. This can be done by searching for IDM crack download 2023 on your preferred search engine.
Install IDM: Once the IDM crack has been downloaded, you can begin the installation process. Simply double-click on the downloaded file and follow the instructions on the screen.
Crack IDM: After the installation is complete, you will need to crack IDM in order to use it for free. This can be done using the crack file that you downloaded in step 1. Simply follow the instructions provided with the crack file to complete the process.
H3: How to Use IDM Crack Download 2023
Start a Download: To start a download using IDM, simply click on the link for the file you wish to download. IDM will automatically take over the download process and begin downloading the file at a much faster speed.
Manage Downloads: IDM has a built-in download manager that allows you to easily manage and organize your downloads. You can view the progress of your downloads, pause and resume downloads, and schedule downloads for a specific time or date.
Advanced Features: IDM also offers advanced features such as the ability to download videos from popular video sharing websites, the ability to download multiple files at once, and the ability to set download
Please sign in to leave a comment.