---
title: Installation Instructions for FusionSwirl
description: Decorative Ceiling
---
[Skip to content](https://support.decorativeceilingtiles.net/installation-instructions-for-fusionswirl#main-content)
[](https://www.decorativeceilingtiles.net/)
- [Home](https://www.decorativeceilingtiles.net/)
- [Online Store](https://www.decorativeceilingtiles.net/)
- [FAQs](https://support.decorativeceilingtiles.net/decorative-ceiling-tiles-faq)
- [Installation Guides](https://support.decorativeceilingtiles.net/installation-guide)
- [Project Estimator](https://www.decorativeceilingtiles.net/shop-all/)
- [Blog](https://www.decorativeceilingtiles.net/blog/)
Open main navigation
Close main navigation
- [Home](https://www.decorativeceilingtiles.net/)
- [Online Store](https://www.decorativeceilingtiles.net/)
- [FAQs](https://support.decorativeceilingtiles.net/decorative-ceiling-tiles-faq)
- [Installation Guides](https://support.decorativeceilingtiles.net/installation-guide)
- [Project Estimator](https://www.decorativeceilingtiles.net/shop-all/)
- [Blog](https://www.decorativeceilingtiles.net/blog/)
- [Contact us](https://www.decorativeceilingtiles.net/contact-us/)
[Contact us](https://www.decorativeceilingtiles.net/contact-us/)
This is a search field with an auto-suggest feature attached.
- There are no suggestions because the search field is empty.
1. [Decorative Ceiling](https://support.decorativeceilingtiles.net/?hsLang=en)
2. [Installation Guide](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en)
# Installation Instructions for FusionSwirl
- [Home](https://support.decorativeceilingtiles.net/hc/en-us?hsLang=en)
- [Decorative Ceiling Tiles Store](http://www.decorativeceilingtiles.net/)
- [FAQ](https://support.decorativeceilingtiles.net/hc/en-us/categories/115000119853-Decorative-Ceiling-Tiles-FAQ?hsLang=en)
- [Installation Guide](https://support.decorativeceilingtiles.net/hc/en-us/categories/16492254875931-Installation-Guide?hsLang=en)
- [Video Answers](https://www.decorativeceilingtiles.net/video-answers/)
- [Project Estimator](https://www.decorativeceilingtiles.net/ceiling-wall-tile-project-estimator/)
- [Blog](https://www.decorativeceilingtiles.net/blog)
[FusionSwirl™](https://www.decorativeceilingtiles.net/fusion/) is a decorated aluminum sheet that can be installed easily to various substrates, including drywall.
**STORAGE**
Sheets should be stored indoors on a solid, flat, dry surface. Do not stack on concrete floor or any other surface that emits moisture. Lay sheets flat with proper support on the ends of sheets. Do not stand sheets on edge. Sheets should be stored in a cool, well-ventilated, dry area. Prior to installation, allow sheets to acclimate to the room temperature and humidity for 24-48 hours in the installation location.
**MAINTENANCE**
Clean surfaces with a soft cloth using a household cleaner – waxes, Windex type solutions, or ordinary soap and water. Good furniture or automobile waxes can provide additional protection.
**ALUMINUM SHEET LAMINATION**
If adhering the sheet to a substrate first (good quality hardwood plywood, high density particleboard, or MDF should be used as the substrate) - clean the substrate with a clean brush. Inspect the sheet for quality prior to fabrication.
Laminate to substrate using techniques similar to working with HPL’s. Cut the sheet to size with shears or a saw, and be sure that the blades are sharp. Leave the protective masking on the product during machining/installation. Cut into the sheet so that rough edges are on the back of the sheet. Sand down cut edges with 220 grit sandpaper. Files may also be used to de-bur sharp edges, and always file down on the decorative surface. It is always best to test cut first to confirm results.
**ROUTING INFORMATION**
Sharp multi-fluted carbide cutters are necessary; the larger the diameter the cutter the better the results. It is important that the cutter travel direction is against the cutter rotation. ALWAYS CUT DECORATIVE SIDE UP (into the decorative face). When routing, the less material removed, the better. It is also important that the face of the material be protected from the base plate of the router. For edge trimming, high speed trimmers should be used (approximately 22,000 RPM) and will produce smooth burr-free edges. If using a CNC router refer to your CNC manual for optimal settings for cutting aluminum.
**SAWING INFORMATION**
Table and/or panel saw: always use sharp carbide tipped blades with 80 to 100 teeth. Blade should be 8” to 12” in diameter, and at 0 degree rake for best results. It is always best to cut into the decorative face with the blade to minimize burring and edge distortion. Do not force material through saw. A constant feed rate will produce smoother cuts. Blade wax will promote better cuts.
**LAMINATION/ADHESIVES**
Always check with your adhesive supplier first to make sure that the adhesive that you select is suitable for your application (common types are: contact adhesives, cements – trowel on types such as FRP adhesives, panel adhesives, or double sided tapes, but specs do vary from specific item to item and from manufacturer to manufacturer – not all are compatible). In all cases, the adhesive manufacturer’s instructions should be followed as to the use of the adhesive and substrate preparation.
1. It is helpful to prep sheets prior to lamination by scuffing the backside with 80 grit sandpaper.
2. When applying FRP adhesive, follow the adhesive manufacturer’s recommendations for trowel style (e.g. appropriate height of adhesive bead left by trowel). It is important to apply adhesive carefully and follow all directions to prevent problems that may result from using too little or too much adhesive. 100% adhesive coverage applied to the entire back of the panel is recommended by using a “crosshatch” pattern. Adhesive should extend to all edges of the panel and should be applied directly to the back of each individual panel.
3. Use only oil-based naptha, or mineral spirits for adhesive clean up. Do not use ammonia, abrasive cleaners/pads, or harsh solvents like lacquer thinner. It is recommended that you test your adhesive system and/or cleaning agents with a sample piece of aluminum.
**CONDITIONS & WARRANTY**
ATI Decorative Laminates believes all information contained herein to be correct. It is the responsibility of the fabricator/customer to completely test the adhesives and methods of fabrication to ensure that the results are satisfactory. ATI is not responsible for any fabrication or ancillary costs involved with using FusionSwirl products.
All shipments are to be inspected within 10 working days after delivery. We are to be informed in writing of any potential adjustment necessary. The seller’s only obligation will be to replace defective sheets on a one to one basis. Neither the manufacturer nor the seller shall be liable for any additional damage or loss, directly or indirectly, arising as a result of using FusionSwirl products.
Slight imperfections and color variations from sheet to sheet are possible and considered normal. Please inspect each sheet carefully before fabrication to ensure it meets your needs.
**CAUTION**
**FusionSwirl and other metal laminates will conduct electricity. To avoid electrical shock and damage to equipment, please make sure that all electrical circuits, tools, and devices used with FusionSwirl are properly grounded.**
- [Installation Guide](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#main-content)
- [Faux Beam](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#faux-beam)
- [NuMetal Installation Instructions](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#numetal-installation-instructions)
- [Crown Molding](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#crown-molding)
- [Installation:: Styrofoam Ceiling Tiles](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-styrofoam-ceiling-tiles)
- [Installation:: Tin Backsplash Tiles](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-tin-backsplash-tiles)
- [Installation:: Mirroflex Faux Wood Door Skins](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-mirroflex-faux-wood-door-skins)
- [Installation:: Faux Tin Ceiling Tiles](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-faux-tin-ceiling-tiles)
- [FAD Hand Painted Ceiling Medallion](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#fad-hand-painted-ceiling-medallion)
- [Installation:: Faux Leather Wall Panel](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-faux-leather-wall-panel)
- [Installation:: Metal Ceiling Tiles](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-metal-ceiling-tiles)
- [Installation:: MirroFlex](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-mirroflex)
- [Lumisplash Installation Guide](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#lumisplash-installation-guide)
- [Installation:: Tin Ceiling Tiles](https://support.decorativeceilingtiles.net/installation-guide?hsLang=en#installation-tin-ceiling-tiles)
- [Sample Packs](https://support.decorativeceilingtiles.net/sample-packs?hsLang=en#main-content)
- [Samples Packs](https://support.decorativeceilingtiles.net/sample-packs?hsLang=en#samples-packs)
- [FAQs](https://support.decorativeceilingtiles.net/faqs?hsLang=en#main-content)
- [FAQs About Faux Tin Ceiling Tiles](https://support.decorativeceilingtiles.net/faqs?hsLang=en#faqs-about-faux-tin-ceiling-tiles)
- [FAQs About Metal Ceiling Tiles](https://support.decorativeceilingtiles.net/faqs?hsLang=en#faqs-about-metal-ceiling-tiles)
- [Aluminum or Tin plated steel?](https://support.decorativeceilingtiles.net/faqs?hsLang=en#aluminum-or-tin-plated-steel)
- [Shanko](https://support.decorativeceilingtiles.net/faqs?hsLang=en#shanko)
- [FAQs About Styrofoam Ceiling Tiles](https://support.decorativeceilingtiles.net/faqs?hsLang=en#faqs-about-styrofoam-ceiling-tiles)
- [Returns and Refunds](https://support.decorativeceilingtiles.net/faqs?hsLang=en#returns-and-refunds)
- [Painting](https://support.decorativeceilingtiles.net/faqs?hsLang=en#painting)
- [Our Showroom](https://support.decorativeceilingtiles.net/faqs?hsLang=en#our-showroom)
- [Orders: How long will it take?](https://support.decorativeceilingtiles.net/faqs?hsLang=en#orders-how-long-will-it-take)
- [How many tiles will I need?](https://support.decorativeceilingtiles.net/faqs?hsLang=en#how-many-tiles-will-i-need)
- [Pricing](https://support.decorativeceilingtiles.net/faqs?hsLang=en#pricing)
- [MirroFlex Structures](https://support.decorativeceilingtiles.net/faqs?hsLang=en#mirroflex-structures)
- [Acoustical Ceiling Tiles](https://support.decorativeceilingtiles.net/faqs?hsLang=en#acoustical-ceiling-tiles)
- [Copper Tiles](https://support.decorativeceilingtiles.net/faqs?hsLang=en#copper-tiles)
- [Ceiling Tile Replicas and Custom Designs](https://support.decorativeceilingtiles.net/faqs?hsLang=en#ceiling-tile-replicas-and-custom-designs)
- [Bathroom Ceilings](https://support.decorativeceilingtiles.net/faqs?hsLang=en#bathroom-ceilings)
[mailto:support@decorativeceilingtiles.net](mailto:support@decorativeceilingtiles.net)
© 2026 Decorative Ceiling Tiles. All Rights Reserved.